top of page

BOLT-ON FRAME SECTION DATA

Bolt-on frames require fixing holes to be drilled through the vessel structure. The frames are usually drilled at between 100mm and 150mm intervals. There are two different interior trim options:

  • Type 1 - a flat interior trim ring which is fixed using machine screws (external) and interscrews (internal).

​

  • Type 2 - a channel section interior trim which is fixed using self-tapping screws from the outside. There are no visible fixings on the interior frame for the Type 2 trim.

​

Bolt-On Frame Interior Trim Types
Bolt-On Frame Interior Trim Types

Type 1 Trim

Type 2 Trim

Section S
S Section Cross Section

  • Bend radii (mm): 47.5/50/57/63.5/70/75/89/100/115/125/140/150/211.5 (for hinged windows only radii in red are available)

  • Fastenings visible on the exterior window flange

  • 4mm, 6mm or 8mm single glazed.

  • Fixed, hinged and hopper windows only

S Section Trims
Section D
D Section Cross Section

  • Bend radii (mm): 47.5/50/57/63.5/70/75/89/100/115/125/140/150/211.5 (for hinged windows only radii in red are available)

  • Fastenings visible on the exterior window flange

  • 4mm, 6mm or 8mm single glazed suitable for all window styles. Only 6mm glazing for sliding & hopper windows

  • Double-glazed to 22mm total thickness for fixed, hinged and hopper windows only

D Section Trim Types
D Section Trim Types
Section V
V Section Cross Section

  • Bend radii (mm): 50/63.5/75/89/100/115/125/140/150 (for hinged windows only radii in red are available)

  • Fastenings visible on the exterior window flange

  • 8mm, 10mm or 12mm single glazed for fixed, hinged and hopper windows only

V Section Trim Types
Section W
W Section Cross Section

  • Bend radii (mm): 63.5/75/89/100/115/125/140/150 (for hinged windows only radii in red are available)

  • Fastenings visible on the exterior window flange

  • 10mm single glazed suitable for sliding, half-drop and full-drop windows

  • 8mm, 10mm or 12mm glazing for fixed and hinged windows

  • Double-glazed to 29mm total thickness for fixed, hinged and hopper windows only 

W Section Trim Types
W Section Trim Types
Section BR (Bullet Resistant)
BR Section (Bullet Resistant)

  • Only available with mitred corners

  • Single glazing up to BR6 or NIJ3 spec, maximum of 38mm thick

  • Minimal distance between bottom of glass ad vessel structure to minimise potential of bullet penetration

BR Section trim type
bottom of page